Fujifilm EF-X20 Shoe-Mount Flash for Fujifilm X
Series Cameras is a dedicated shoe-mount flash designed for X series
cameras. This compact (1.4 x 2.3 x 1.9") and lightweight (3.5 oz)
flash can be used in TTL mode. It also offers a built-in wide
diffuser that allows it to be used with a 20mm (35mm equivalent)
lens, as well as a built-in slave mode with pre-flash and
non-pre-flash control available. Manual flash output can be selected
from full power to 1/64 power. The EF-X20 runs on 2x AAA alkaline or
Ni-MH batteries (not included).
Exposure Setting Dial
Enables flash compensation from -1EV to +1EV in
increments of 1/3 stops in the TTL Auto mode. Enables flash output
levels of 1/1, 1/2, 1/4, 1/8, 1/16, 1/32 and 1/64 in the Manual mode.
Immediate visual confirmation of settings even when the unit is turned
Lever For Setting Wide Panel
Raise the lever to support a focal length of down to 20mm (35mm film equivalent)--the guide number becomes 12.
Mounting Lock Release Button
Featuring a new mechanism that automatically
locks the shoe-mount flash unit when it is placed on the hot shoe. The
mechanism firmly fixes the flash unit in place without operating the
locking bar or tightening the screw, just easy attachment.
Wireless Slave Flash Selector
To use the unit as a master flash, set the switch
to X. To use the unit as a slave flash, set the switch to N-MODE if the
master flash is the "non-preflash" type, and P-MODE if the master flash
is the "preflash" type. The unit fires automatically upon detecting
light from the master flash.
Compact and lightweight, yet offers a strong
light intensity of guide number 20.
With FUJIFILM's unique flash control
technology "i Flash technology", it can automatically optimize
the amount of light suitable to every shooting condition.
Crafted from premium metal materials to
complement the design of the X-Series cameras.
Ergonomic design for responsive dial control.
Built-in wide diffuser can be selected by
using lever on the side of the flash.
Built-in "Slave Mode" for advanced
20' (6.1 m)
ISO100 at 50 mm position
1/1 - 1/64
20 mm (Full frame)
Approximately 5 - 6 seconds
-1 EV to +1 EV (in .33 EV steps)
2x AAA Alkaline, Rechargeable Ni-MH Batteries
Dimensions (W x H x D)
1.4 x 2.3 x 1.9" / 3.6 x 5.8 x 4.8 cm
3.53 oz / 100 g